Monday, August 30, 2010

Testing the Sick Seconds Camaro!

If you've been following along here, as well as on our official website (and Facebook Fan Page, too!), then you're no doubt familiar with Sick Seconds, the Drag Week project 1969 Camaro built and prepped by the talented folks at ProRides. It's been a long road for the orange machine, but it hit the strip this past weekend for some testing... and things are looking incredible.


On Saturday and Sunday,the crew ran shake down runs on the car and could not be happier (or, as Denny said, "we could be happier with about 3 more weeks to prepare for Hot Rod Drag Week.") Steve Roth said the car is reacting on the track much better than any of our expectations, and is going straight down the track. Granted, the crew still need to scale the chassis to enhance it more, but for straight-out-of-the-garage, it's looking amazing. The motor is on a mild tune, which made 1500+ horsepower at the flywheel at a recent dyno session. The car is limited to 16 lbs. of boost with the current pulley set up, and the plan is to take the engine up to 30 lbs. of boost and more RPM when in full Drag Week mode. The Camro turned a 7.99 1/4 mile ET at only 65% throttle and no tranny brake on the mild tune... which almost sounds frightening! With only 2 weekends left before Drag Week, the remaining goal is to turn up the power and have the car run consistent. Steve, Gary, Kevin, Denny and his father will be doing everything they can to make it happen. Stay tuned for more updates and here's hoping for a successful Hot Rod Drag Week!

Sunday, August 29, 2010

Vette Week Begins!

Let's start it off with the grand debut of the C2ZR1 this past weekend at Corvettes at Carlisle. Just about ten months ago, Jeff over at Heartland Customs gave me a shout, and we threw ideas around for a car that we had both almost left for dead. (Rewind to the previous Summer, and there were rumblings afoot for a project that merged then-upcoming ZR1 running gear with a second-generation Vette, and Jeff had a notebook loaded with ideas and visions... and then, as happens with these things, life intervened, and the project fell dormant...) Back to last October... The project was back on, and Jeff was seeking the right client, and I was given the go-light to start drawing. Stoked? Oh heck yeah... With his attention to detail, this would be killer.

A few phone calls and emails later, I had created some artwork:



With literally dozens of subtle (and a few not-so-subtle) mods, the car went from timeless, iconic Chevrolet design statement to nasty, yet eerily-refined evil bruiser in a few short days:

Aside from the obvious technological advancements bein thrown at the car, it just had to have that over-the-top WOW-factor... and speaking of top, it was decided early on that this '64 was going to have a carbon fiber roof, no if's, and's or but's.
It's fiber-licious:





We'll show more on the car very soon... but wanted to throw a sneak peek at the incredible work of Jeff and his crew, and at the same time, give them a huge pat on the back for yet another job so well done, it just kinda makes us all giddy thinking of where they'll be in a few years. I've had the incredible honor of watching them turn out some amazing iron (and 'glass... this being our second 'Vette project together), and when you think about the excitement that their work brings... well... imagine it from my perspective. Front row seats are cool... but getting to add some color commentary? Better still.

Keep looking in this week for not only more on this great car, but for some exciting new Corvette reading material! Yup... we got some new books in, and will serve up some toasty-hot reviews and ordering info, too. Stay up-to-date on our site at www.problemchildkustoms.com

Sunday, August 1, 2010

The Second BMX Challenge...

...picks up right where last year's left off, but with less bruising and sore muscles.

The Second Annual Hot Rod Industry BMX Challenge takes place later this week (August 7, to be exact) in Louisville, KY, and returns to the amazing Derby City BMX grounds, and coincides with the NSRA Street Rod Nationals. As the official release reads:

"We are really excited about the BMX Challenge this year – we have changed the rules just a little – for the HRIC you must be a participant or vendor at the Street Rod Nationals – the BMX race is once again FREE of charge for you to participate in BUT to mix it up a little and to help give you guys and the spectators a better show we challenge you to “get sponsored”.
We will be running a Pro/Am mixed in with the Hot Rod Challenge and in order to bring in the “big guns” we have to show them the money! So we challenge you to get a sponsor for your race. Along with your name being announced during the race your sponsor will get some plugs as well! We ask you to get a min of $25 but challenge you to get more – the rider with the most sponsor money will get an extra special prize! Standard Byke Company is on board again this year – the winner of the HRIC will receive a new frame! Add to that more prizes, surprises and yet another frame from the great folks at Intense, and you have the makings of a grand event indeed."

Last years' event attracted 16 of the biggest and best builders in the game today, including Dave Tucci, Jesse Greening and Roger Burman, among the many talented riders and other industry professionals from companies like Billet Specialties, Welder Series, Vintage Air, Art Morrison, Calfornia Car Cover and more! Bill Stevens from Star Custom took the grand prize last year, after taking the lead from John Pearce after he lost rhythm in the last corner. Truly an exciting and fun event, to be certain, and with this year's prizes, it promises to be an even bigger draw! 




What's really fun for me, anyway, is being tapped to create some art each year for the event... This year, as usual, the Stranges gave me full creative control, and told me to "just do what you do!". Suffice to say, I've had vintage drag racing on my brain for a few weeks, and busted out a Fiat altered, smoking the tires... I wanted more action this year, and wasn't going to go with a static car like last year. One thing led to another, and soon there was a rider in full flight overhead, and it just seemed to come together as most fun pieces tend to do. 


I threw in a couple of little details as tributes to friends and family (as I do with almost every piece that leaves the Studio), and I'm genuinely stoked about the finished product. There's nothing like creating a souvenir piece for an event like this, and even better when it's for not only our colleagues and friends, but for prople whom I look up to for their skill, talent and drive... 

If you'll be in Louisville for the Nats, or just happen to live or have plans in the neighborhood, make it a point to go to the races on Saturday... Get in on the fun, meet some great, influential folks, and enjoy the thrill of a hobby that got so many of us into cars in the first place!